HDT/VICAT Testing Machine – Thermal Analysis for Plastics NG-HDT
Metal Testing Equipment
Standards
ISO 2507, ISO 75, ISO 306, ASTM D648, ASTM D1525, GB/T 8802, GB/T 1633, GB/T 1634
Description
The HDT/VICAT testing machine offers high precision, reliability, and efficiency for the thermal analysis of thermoplastics and polymers. Engineered with advanced sensors and high-temperature-resistant components, it ensures minimal deformation, fast response, and precise data transmission, delivering consistent and accurate test results. When integrated with a chiller system, testing capacity doubles, significantly enhancing productivity.
The test station, made from a low-expansion coefficient alloy, maintains measurement accuracy up to 200°C without recalibration, complying with international standards. Widely used for HDT and Vicat softening temperature testing, this HDT/VICAT machine is essential for plastic and pipe manufacturers, quality control laboratories, construction engineering, and research institutions. Designed for product development, material testing, and regulatory compliance, it is a crucial tool for manufacturers, quality assurance teams, and research professionals seeking precise and efficient thermal analysis solutions.
HDT/Vicat Testing Machine Features
-
Simultaneous HDT and VICAT Testing – Conduct both tests at the same time, improving efficiency and throughput.
-
High-Stability Test Station – Minimal deformation under heat, with deflection temperature accuracy up to 200°C without recalibration.
-
Automatic Loading & Lifting – Eliminates manual weight handling for easier and more efficient operation.
-
Compact & Cost-Effective Design – Tank volume is reduced by over 50%, significantly lowering operational costs compared to traditional designs.
-
Precision Displacement Measurement – Swiss-made high-precision micrometer ensures exceptional accuracy and stability.
-
Multi-Station Capability – Supports up to six test stations, with up to six deformation transducers and one temperature transducer for precise monitoring.
-
Motor-Driven Test Stations – Easily raise stations from the bath at the touch of a button, simplifying specimen placement.
-
Fully Automated Testing Process – Once the software is started, the test runs automatically according to user-defined parameters.
-
Automatic Bath Cooling – After test completion, the system cools the bath to 280°C, improving equipment utilization for continuous testing.
-
User-Friendly Software – Professional testing software with an intuitive interface for easy operation and data management.
Optimized Cooling System for Maximum Efficiency
Equipping the HDT/VICAT testing machine with a chiller system significantly enhances cooling performance, reducing downtime and increasing operational efficiency. Compared to traditional cooling methods, this advanced system offers several key advantages:
-
High Initial Cooling Temperature – The system supports an initial cooling temperature of up to 280°C, ensuring rapid heat dissipation.
-
Fast Cooling Speed – When used with a chiller, cooling time is reduced to just 45 minutes, dramatically improving equipment utilization and workflow efficiency.
-
Optimized Temperature Control – The chiller lowers the oil temperature to below 25°C, minimizing test errors and ensuring compliance with ISO and ASTM standards for initial heating temperatures.
-
Water-Saving Design – The water chiller recycles water, significantly reducing water consumption while maintaining effective cooling.
Test Station
-
Flexible Test Configurations – Available with 3, 4, or 6 test stations to accommodate different testing needs.
-
Precision Loading System – Includes 10N and 50N dead weights for accurate load application.
-
Ultra-Accurate Deformation Measurement – Swiss-made high-precision micrometer with 0.001mm resolution and ±0.005mm accuracy ensures precise specimen deformation analysis.
-
High-Accuracy Temperature Control – Japan-made RKC temperature controller with ±0.5°C accuracy guarantees consistent thermal conditions.
-
Invar Steel Test Station Assembly – Constructed from low-expansion Invar Steel, minimizing deformation at high temperatures for exceptional test stability and accuracy.
Technical Specifications
| Model | NG-HDT300 | NG-HDT400 | NG-HDT600 |
| Type | A | B | C |
| Test station | 3 | 4 | 6 |
| Immersion bath | 1 | 1 | 1 |
| Heat transfer medium |
Methyl Silicon oil,22 liter Viscosity: 300 cSt, or 300 mm2/s Silicon oil brand: DON CORNING PMX-200 350 cSt, KF96-300 Or transformer oil, 10#, 22 liter |
||
| Temperature sensor | 3 | 4 | 6 |
| Temperature range |
Ambient (20℃)-300℃ |
||
| Temperature accuracy |
±0.5℃ |
||
| Heating Speed | Speed A:
5±0.5℃/6min Speed B: 12±1℃/6min |
||
| Micrometer | 3 | 4 | 6 |
| Deformation measurement range | 0-10mm | ||
| Deformation resolution | 0.001mm | ||
| Deformation measurement accuracy | 0.003mm | ||
| Vicat loading capacity |
GA=10N±0.2N, GB=50N±1N |
||
| Deformation measurement range | 0-10mm | ||
| HDT Test |
Method A: USE FIBRE STRESS 1.80Mpa Method B: USE FIBRE STRESS 0.45Mpa Method C: USE FIBRE STRESS 8.00Mpa |
||
| HDT Test Span |
Outer span: 100mm, ASTM D648 Inner span: 64mm, ISO 75 |
||
| Maximum heating power | 5000W | ||
| Power requirements |
220V 50/60Hz 3 Phase |
||
| Dimensions | 32" x 24.5" x 28.5" | ||
| Weight | 253 lbs | 253 lbs | 617 lbs |
| Cooling |
Nature cooling or water cooling (less than 150℃) |
||
Standard Accessories
| Model | NG-HDT300 | NG-HDT400 | NG-HDT600 |
| Type | A | B | C |
| Main Frame | 1 set | 1 set | 1 set |
| Test Stations | 3 | 4 | 6 |
| Swiss-made Micrometers | 3 sets | 4 sets | 6 sets |
| Platinum resistance temperature sensors | 3 sets | 4 sets | 6 sets |
| Temperature controllers | 3 sets | 4 sets | 6 sets |
| Loading nose for HDT | 3 sets | 4 sets | 6 sets |
| Needle for VICAT | 3 sets | 4 sets | 6 sets |
| Weight set (10N, 50N) | 3 sets | 4 sets | 6 sets |
| Test software | 1 set | 1 set | 1 set |
Related Products
NG-EML Series A – Single Column Bench Top Universal Testing Machine (50 N – 5 kN)
The NG-EML Series A – Single Column Bench Top UTM (50 N–5 kN) is a precision electromechanical system designed for tension, compression, and flexural testing of low-force specimens. Featuring GenTest™ software, a high-speed servo drive, Class 0.5 accuracy, and USB/Ethernet control, this compact tabletop unit supports ASTM, ISO, and EN standards. Ideal for testing plastics, rubber, foams, films, composites, and thin metals.
Alignment Device
(NADCAP-Ready Precision Fixture)
NextGen Material Testing’s Alignment Device is a precision-engineered fixture designed to ensure perfect axial alignment in universal testing machines.
G-800E Trinocular Metallurgical Microscope
This inverted metallurgical trincoular microscope is ideal for both industrial or educational metallurgy applications.
Class J - Charpy and Izod Automatic Impact Testing System - 1J - 50J
Class J is widely used for lzod and Charpy impact test on softer metals, plastics and rubber specimens. Equipped with tensile impact pendulum and fixtures, it can carry on tests on plastic film and sheet. The newly enhanced design offers the most cost-effective configuration to address Charpy test from 1J to 50J (0.7 - 37 ft/lbs), and lzod test from 1J to 22J (0.7 - 16 ft/lbs).
Class D Single-Column Charpy Impact Tester – High-Precision Pendulum Testing Machine
NextGen’s Class D Single-Column Charpy Impact Testing System is built for high rigidity and dependable specimen testing across a wide energy range. It supports impact energies from around 150 J (111 ft-lbs) up to around 750 J (553 ft-lbs), covering most standard metal testing needs. The unit includes a digital display and offers a software upgrade option for data plotting. Additional features, such as automated specimen feeding and integrated cooling or heating systems, are available as optional enhancements.
Class G Single-Column Charpy & Izod Impact Tester – High-Precision Pendulum Testing Machine
NextGen's Class G – Single Column Charpy and Izod Impact Testing system provides a high level of rigidity and specimen testing capacity. This Charpy and Izod Impact tester has a minimum capacity of 150 J (111 ft/lbs) and a maximum capacity of 750 J (553 ft/lbs). The system comes standard with a digital display with software upgrade function for data plotting. The Class G impact system can also include automatic specimen feeding, cooling and heating systems as optional upgrades.
GenCut GL100M – Precision Manual Metallographic Sample Cutting Machine with Simple User-Friendly Operation and Large Cutting Capacity Φ100mm
Introducing the GenCut GL100M Manual Cutting Machine, expertly designed for precision metal sample cutting.
GenCut GL350 – Precision Metallographic Sample Cutting Machine with Simple User-Friendly Operation and Large Cutting Capacity Φ100mm
The GenCut GL350 is a cutting-edge high precision cutting machine equipped with advanced features and capabilities
GenCut GL80A – Precision Metallographic Sample Cutting Machine with Simple User-Friendly Operation and Large Cutting Capacity Φ80mm
Introducing the GenCut GL80A, a highly precise cutting machine offering both automatic and manual work modes.
GenCut GL 170XY – Multi Function Abrasive Cut Off Saw with Touch Screen User Friendly Interface and Large Cutting Capacity – Φ170mm
The GenCut GL 170XY has a large 170mm diameter maximum cutting capacity equipped with a fully automated XY table.
GenCut GL 120XY – Multi Function Abrasive Cut Off Saw with Touch Screen User Friendly Interface and Large Cutting Capacity Φ120mm
The GenCut GL 120XY has a large 120mm diameter maximum cutting capacity equipped with a fully automated XY table.
GenCut GL200E – High Speed Automatic Precision Metallographic Cutter with User-Friendly Touch Screen Interface with max. cutting diameter of 60mm
GenCut GL 200E precision cutting machine includes a touch screen and PLC control, with stable performance and real-time display parameters.
GenCut GL100E – Low Speed Precision Metallographic Automatic Cutter with User-Friendly Touch Screen Interface with max. cutting diameter of 25mm
GenCut GL100E low speed series metallographic precision cutter has variable speed control from 50-1000 rpm.
GenGrind N Series 8” 200S / 10" 250S / 12" 300 S - Advanced Metallographic Grinder & Polisher - Variable Speed 50-1000rpm –Touch Screen Controlled
Introducing the GenGrind N Series metallographic grinders and polishers, offered in sizes 8", 10", or 12" diameter.
GenGrind SA-I 250S 10" Single Wheel Semi Automatic Grinder & Polisher - Variable Speed 100-1000rpm – Individual Force Control - Touch Screen Controlled with Automatic Specimen Mover Power Head – (various wheel sizes available)
Discover the single wheel semi automatic GenGrind 10" SA-I 250S, your ultimate answer to grinding and polishing needs.
GenGrind SA-C 250S 10" Single Wheel Semi Automatic Grinder & Polisher - Variable Speed 100-1000rpm – Central Force Control - Touch Screen Controlled with Automatic Specimen Mover Power Head – (various wheel sizes available)
Introducing the GenGrind SA-C 250S – your ultimate single wheel semi automatic grinding and polishing solution.
GenGrind FA-IC 250D 10" Dual Wheel Fully Automatic Grinder & Polisher - Variable Speed 100-1400rpm – Both Individual and Central Force Control - Touch Screen Controlled with Automatic Specimen Mover Power Head – (various wheel sizes available)
Introducing the GenGrind FA-IC 250D Dual Wheel Polisher and Grinder, a fully automatic metallographic grinding and polishing machine
GenGrind FA-IC 250S 10" Single Wheel Fully Automatic Grinder & Polisher - Variable Speed 100-1400rpm – Both Individual and Central Force Control - Touch Screen Controlled with Automatic Specimen Mover Power Head – (various wheel sizes available)
GenGrind FA-IC 250S Single Wheel Polisher and Grinder, an advanced and fully automatic metallographic grinding and polishing machine
GenPress MFA Dual HYD Fully Automatic Dual Hydraulic Mounting Press – Hydraulic Controlled – 1-2” (25-50mm) Mold Assembly (other sizes available upon request)
GenPress MFA DUAL HYD Metallographic Sample Preparation is an advanced automatic mounting press for compression mounting of material samples
GenPress MFA MOT - Fully Automatic Motorized Mounting Press – Motor Controlled – 1-2” (25-50mm) Mold Assembly (other sizes available upon request)
GenPress MFA MOT mounting press system frees the operator to perform other tasks in the laboratory during the cycle allowing better efficiency
GenPress MFA HYD - Fully Automatic Hydraulic Mounting Press – Hydraulic Controlled – 1-2” (25-50mm) Mold Assembly
GenPress Mounting Press for Metallographic Sample Preparation is an advanced automatic mounting press for compression mounting of material sample
Class H - Servo-Motor Dual Column Charpy Impact Tester - 300J, 450J, 600J or 750J
NextGen's Class H – Servo-Motor Dual Column Charpy Impact Testing system offers of an exceptional combination of versatility and robust build. This impact system provides our most durable options designed with a dual column configuration. The system offers the ultimate versatility of testing 300J (212 ft/lbs), 450J (332 ft/lbs), 600J (442 ft/lbs) and a maximum of 750J (553 ft/lbs) capacities based on both Charpy and Izod test methods. The unit comes standard equipped with a servo motor and is designed to test at any preset angle. The unit comes standard with all the functions of our Class G tester as well as enhanced functionality upgrade of a force transducer inside the strikerwhich enables the determination of characteristic force, energy and displacement parameters such as pre-maximum force energy (Wm), the post maximum force energy, the general yield force (Fgy), the force at brittle fracture initiation (Fbf) and the arrest force (Fa).
NextGen GenTor Horizontal Torsion Tester
NextGen GenTor Torsion Tester boasts a horizontal type load frame with high stiffness, ensuring accurate and reliable test results.
Triple Specimen Chamber Motorized Charpy Notch Making Machine
The GenNotch 4000UPG Series is a motorized Charpy & Izod Notch Making Machine with a triple specimen chamber.
NG-EML Series B – Dual Column Bench Top Universal Testing Machine (100 N – 10 kN)
The NG-EML Series B is a high-precision dual-column benchtop universal testing machine engineered for tensile, compression, and flexural testing in the 0.1 kN to 10 kN range. It features Class 0.5 accuracy, a rigid FEM-optimized frame, and a direct-drive servo system with advanced closed-loop control, making it ideal for testing rubber, plastics, metals, composites, and high-performance polymers in both R&D and quality assurance settings.
NG-EML Series C – Dual Column Bench Top and Floor Standing Universal Testing Machine (5 kN – 50 kN)
The NG-EML Series C is a precision-engineered dual-column universal testing machine for tension, compression, and flexural testing of metals, composites, rubbers, and polymers. Available in both bench-top and floor-standing formats, with force capacities from 5 kN to 50 kN and Class 0.5 accuracy.
NG-EML Series D – Floor Standing Universal Testing Machine (50 kN – 1000 kN)
The NG-EML Series D – Floor Standing Universal Testing Machine (50 kN–1000 kN) is a dual-column system for tensile, compression, flexural, shear, and cyclic testing of high-strength metals, composites, polymers, and advanced materials. Available in single-space and dual-space configurations, it meets ASTM E8, ISO 6892-1, ISO 527, and GB/T 228 standards. With closed-loop control, 1200 Hz sampling, ultra-low speeds (0.00005 mm/min), and waveform generation, it is ideal for aerospace, automotive, construction, and research labs.
Grips and Fixtures for NextGen Universal Testing Machines (UTMs)
NextGen's grips and fixtures are precision-engineered accessories that transform universal testing machines into versatile systems capable of tensile, compression, flexural, shear, and other mechanical tests. Designed to meet ASTM and ISO standards, these components ensure accurate, repeatable results across various materials and applications.
GenTest Data Acquisition Software - Advanced Universal Testing Machine Software
Upgrade to GenTest, the latest data acquisition software for universal testing machines. Ensure precise, repeatable material testing with an intuitive interface, powerful analysis tools, and full compliance with ASTM, ISO, DIN, and more.
NG - LeebGen 3000 - Leeb Rebound Portable Hardness Tester
LeebGen3000 is a non-destructive precision metal hardness tester developed according to the latest industry standards. LeebGen 3000 is equipped with features which provide the instrument with a combination of a user-friendly interface and exceptional test result accuracy. This in turn allows for ease of operation and an accurate conversion display of virtually any metal hardness testing value.
GenVac MP3 Series - Epoxy Mounting Vacuum Impregnation System for Metallographic Sample Preparation
Experience our enhanced version of the GenVac MP Series. Our user-friendly touch screen interface along with automatic unit conversion and memory modes holds the title of one of the most advanced systems in the marketplace.
TensileTurn CNC XL - Heavy-Duty Round Specimen Preparation
TensileTurn CNC XL is the upgraded version of our TensileTurn CNC classic model. This powerful lathe is capable of turning round, square and irregular stock of tougher materials. The machine comes equipped with a robust tooling fixture, precision tailstock, and a high powered spindle. TensileTurn CNC XL is no doubt the ultimate round tensile test sample preparation machine capable of both tensile specimen preparation and advanced CNC machining. The unit is capable of meeting high capacity and high quantity output requirements for medium to large size laboratories and manufacturing facilities.
Ultrasonic Contact Impedance Hardness Tester - UH200
Welcome to our most advanced and cost-effective Ultrasonic Hardness Testing System. This portable machine is all you need and more!
TensileTurn CNC - Round Tensile Sample Preparation
Featuring a convenient size and high accuracy, the TensileTurn CNC can produce the highest accuracy in round tensile specimens. Able to prepare round tensile specimens, sub-size specimens, threaded tensile specimens, button-head tensile bars, fatigue specimens or any other round testing specimens, the TensileTurn CNC is easy to operate for both experienced and inexperienced operators.
TensileMill CNC XL - Flat Tensile Sample Preparation Equipment
This larger tensile sample preparation machines is the perfect fit for higher tensile sample preparation volumes. Equipped with our tensile software and Carbon Mach4 CNC software combo this machine is both simple to use and versatile for your long-term CNC machining requirements.
NG-SHM CLASS DP - Servo Hydraulic Testing Machine
600kN-2000kN - Servo-Hydraulic Universal Testing Machine - Side Action Wedge Grip 2/4 columns, servo-controlled hydraulic
NG-SHM Class D - Servo Hydraulic Universal Testing Machine
600kN-2000kN - Servo-Hydraulic Universal Testing Machine 2/4 columns, servo-controlled hydraulic
NG-SHM Class C - Servo Hydraulic Testing Machine
600kN-1000kN - Servo-Hydraulic Universal Testing Machine 6 column, servo-controlled hydraulic
NG-SHM Class B - Servo Hydraulic Testing Machine
300kN-3000kN - Servo-Hydraulic Universal Testing Machine 6 column, servo-controlled hydraulic
TensileMill CNC MINI - Compact Flat Tensile Sample Preparation
Despite its small size, the axis of the heavy cast iron frame on which the TensileMill CNC MINI slide on linear rails very smoothly. Its exceptional machining capability is provided by high powered servos and a 24,000 RPM ISO20 spindle.
Specimen Notching/Broaching Machine
NextGen offers an economical solution for Specimen notching and broaching for Charpy and Izod specimens. This certified system complies with ASTM ISO148, EN10045, ASTM E23, DIN 50115 standards. This automated, motorized solution is capable of preparing two specimens at any one given time up to 46 HRC. A variety of broaches are available for different geometries of notches.
Impact Specimen Cooling and Heating Temperature Chamber – GenChamber
NextGen offers a full range of impact specimen cooling and heating chamber designed to meet virtually all Charpy, Izod and Tensile Impact Testing requirements. NextGen's temperature chambers are a combination of user-friendliness, compact and robust build, offering the ultimate versatility of cooling and heating requirements.
Charpy/Izod Notch Verification Projector System NG-NPS-CIS
Enhance your material testing accuracy with our advanced Charpy/Izod Notch Verification Projector System NG-NPS-CIS.
DWT-1800 Computer Controlled Drop Weight Impact Testing Machine
DWT-1800 Impact Testing Machine is specifically designed for determining the non-plastic transformation temperature of ferritic steel.
Low-capacity Vertical Drop Weight Testers Up To 2000J NG-FWT1 & NG-FWT2
Discover NextGen's NG-FWT1 & NG-FWT2 low-capacity drop weight testers up to 2000J (1475 ft/lbs), designed for precise impact resistance testing of metals & non-metals.
GenTest V 2.0: Advanced Testing Software for Servo-Hydraulic Universal Testing Machines
Gentest is designed to enhance your ability to perform accurate and repeatable mechanical testing of materials, components and finished goods across a full spectrum of applications.
NG-SHM Class A - Servo Hydraulic Testing Machine
200kN-2000kN - Servo-Hydraulic Universal Testing Machine 4 or 6 column, servo-controlled hydraulic.
GenGrind Belt BF - Floor Standing Heavy Duty Dual Stage Belt Grinder for Metallographic Sample Preparation
The GenGrind Belt BF Series is a heavy duty dual stage, wet or dry belt grinder offering a robust, floor standing solution for high volume manual belt grinding applications. GenGrind Belt BF - Heavy Duty Dual Stage Belt Grinder for metallographic sample preparation is designed for high material removal of various sample shapes and configurations.
GenGrind Belt BT - Dual Stage Tabletop Belt Grinder for Metallographic Sample Preparation
The GenGrindBelt BT series is a dual stage, wet or dry table top belt grinder offering the most economical solution for manual grinding applications. The GenGrind BT - Dual Stage Belt Grinder for Metallographic Sample Preparation is designed for high material removal of various sample shapes and configurations. The BT - Belt Grinder system is a table top belt grinder suitable for laboratories designed for high material removal.
GenGrind FA-IC Dual Wheel Fully Automatic
Introducing the GenGrind FA-IC, a state-of-the-art single-chip microcomputer controlled grinding and polishing machine.
GenVac MP Series - Epoxy Mounting Vacuum Impregnation System for Metallographic Sample Preparation
GenVac MP2 - Vacuum Impregnator is designed for precision sample impregnation for porous materials. Common applications for vacuum impregnation systems include rocks and minerals, ceramics, electronic circuit boards and other composite materials.
Micro Vickers and Knoop Hardness Tester - Digital and Digital with CCD Optical Analysis Software
NG-1000 Series
NextGen Micro Hardness testers provide solutions for Vickers and Knoop hardness testing with micro loads ranging from 10gf to 1kgf. The NG1000 series is available in Standard Digital, Digital and CCD configurations for Micro Vickers/Knoop testing.
Macro Vickers Hardness Tester - Standard Digital, Digital and Digital with CCD Optical Analysis Software
NG-5000 Series
NextGen Macro Vickers Hardness testers are available with different load capacities and are available in Standard Digital, Digital or CCD configurations. With 5kgf, 10kgf, 30kgf and 50kgf maximum loads available, the NextGen Macro hardness testers can fit all of your Macro testing requirements.
BrinGen - 3000 Series - Digital Brinell and Automatic Brinell Hardness Tester - Closed Loop System
BringGen 3000 is a digital and automatic Brinell testing system equipped with closed loop technology. The forces range from 62.5kgf to 3000kgf and are electronically controlled according to ASTM E10 for precise and repeatable measurements.
BrinGen Scope - Optically Advanced CCD Brinell Measuring Scope for Manual or Digital Brinell Hardness Testing System
BrinGen Scope - is a Optically Advanced CCD Brinell Measuring Scope for Manual or Digital designed as Brinell Hardness Testing automatic scanning system. It is engineered to work with a computer or a laptop to make your testing program faster and more accurate. The Optical Brinell Scope is equipped with real-time result support.
NG-RockGen - Analogue Series Rockwell Hardness Tester - Manual and Electronic Models
The NG-RockGen Analogue Rockwell Hardness Tester is designed to test the hardness of metals by determining the depth of penetration of an indenter under a large load compared to the penetration made by a preload according to the Rockwell regular scales.
NG-RockGen DGEN Series - Digital Rockwell Hardness Tester - Rockwell Regular, Rockwell Superficial and Rockwell TWIN Digital Models
The NG RockGen Digital Series provides an automatic, digital, high accuracy solution to your Rockwell testing requirements. The Digital series is completely automated and is available in Rockwell Regular or Rockwell Superficial scale configurations.
GenRock NG-150 Series - Advanced Rockwell Hardness Tester - Manual and Automatic Rockwell Hardness Testing System
The NG150 GenRock system can be equipped with a variety of accessories to meet all of your hardness testing requirements. A fully motorized stage, Jominy accessories and a wide variety of specimen fixtures are available to configure the NG150 RockGen system to meet your application.
NextGen Telebrineller Brinell Hardness Testing System
The Telebrineller Brinell Hardness Testing System stands out as the best QA solution for ensuring top-notch quality. Developed specifically for welding crews, Telebrineller draws on over fifty years of field experience and solid metallurgical knowledge. Portable and practical, the entire Telebrineller system, housed in a case, weighs less than ten pounds. It's an ideal choice for Brinell hardness testing in any situation.
Surface Roughness Testers
High accuracy surface roughness testing systems for material surface analysis and statistical processing of data. Multiple model variations to help fit your technical and budgetary expectations.
Universal Hardness Tester for Vickers, Rockwell and Brinell
NextGen's Universal Hardness Tester is a closed loop load cell machine with an 8-inch touch screen interface is the ultimate user-friendly solution for your Vickers, Knoop, Rockwell and Brinell Hardness Testing requirements. The measurements are made through optical objective lens and CCD camera to collect indentation images and to generate your hardness reading on the touchscreen LCD.
Hardness Test Blocks, Indenters and Hardness Testing Accessories
Certified Test Blocks are a requirement as a reference material for any type of hardness testing. At NextGen, we understand the importance of a Test Block to ensure the accuracy of your hardness testing procedures.
Metallography Consumables
Learn about the full scope of NextGen's cutting, polishing & grinding, mounting and etching metallography consumables. Our consumables are compatible with virtually all global brands, offering a rare combination of exceptional quality, longevity and affordability.