Rubber Testing Equipment

Rubber Testing Equipment Rubber Testing Catalogue

Rubber property testing is an essential part of many manufacturing companies delivering our day to day consumables, such as articles of clothing, various seals (leak protectors), production conveyor belts, and even stationary utensils. Rubber elastomer properties are as unique as they are useful. Utilized on almost daily basis, quality testing of these compounds is crucial because they are an essential part of our daily living and manufacturing processes.

Rubbers have many classifications ranging from Natural Rubbers to Silicones and many in between such as Hypalon, Styrene Butadiene and Nitrile. These are grouped based on their physical properties which include: resistance to petroleum, sunlight, ozone and heat, flame, tensile, elongation, water, oxygen, abrasion, and many more. In manufacturing processes rubbers are used for seals in many different industries to provide a leak proof environment with substances such as chemicals, oils, fuels, and other high temperature elements.

Sub-categories

Universal Testing Machines

Universal Testing Machines

Universal Testing Machines can be configured for static testing of multiple properties such as tensile, compression, flexure, tearing, peeling, bending and shearing tests. Check out our range of Force Stands, Electromechanical and Servo Hydraulic Universal Testing Machines.

Shore/IRHD Durometer

Shore/IRHD Durometer

The NX-01 series is a fully automatic durometer for conducting automatic Shore hardness measurements using the operation speeds, measurement loads and indenter dimensions stipulated in ISO, ASTM and other international standards.

Products

AKRON ABRASION TESTER

AKRON ABRASION TESTER

GenKron is used together with a special balance for testing the abrasive consumption of materials. The measurements are done through volumetric loss of a rotating specimen exposed to the action of a standard grinding wheel. It is especially suited for testing harder materials such as shoe soles, tires and other rubber materials.

Read more

Burst Strength Tester for Fabric

Burst Strength Tester for Fabric

GenBurst is designed to test anti-rupture strength of variety of materials such as leather, paper and fabric. The unit tests the resistance of specimens to bursting using a hydraulic diaphragm bursting tester.

Read more

DIN Abrasion Tester

DIN Abrasion Tester

GenDin, is designed to conform to the ASTM D5963 and IS0 4649 standards. This top quality and highly popular abrasion tester will allow you to measure the abrasion resistance of rubbers (vulcanized thermo set rubbers and thermoplastic elastomers) that are subject to abrasive/frictional wear on their actual service. Since wear is always a result of abrasion, different test methods have been developed for the simulation of long term wear.

Read more

DEMATTIA FLEX CRACKING TESTER

DEMATTIA FLEX CRACKING TESTER

GenFlex tests the ability of rubber products to withstand repeated flexing without developing cracks is of prime importance where such products are used in conditions undergoing repeated flexing. Flexing endurance of rubber products is determined by simulating in laboratory the action of flexing repeatedly under standard conditions of speed, mode, and degree of flexing.

Read more

DISCOLORATION METER

DISCOLORATION METER

The machine is used to simulate an environment of sunlight radiation on a specimen to identify the resistance of fabric to discoloration.

Read more

Electric Crocking Tester - GenCrock

Electric Crocking Tester - GenCrock

The machine is used to test the dyeing of the fabric, and the fade degree of the leather after dry or wet rubbing. The test method involves the specimen to be fastened to the base of the crocking meter and rubbed with an abrasive hammer attached to a wet or a dry cloth under controlled conditions. The transfer of colour is then measured using a scale to evaluate the rating of the specimen's dyeing grade.

Read more

Freezing Tester - GenFreeze

Freezing Tester - GenFreeze

GenFreeze is specially designed to test the characteristics of various materials in a cold environment to ensure suitability for use in a cold climate. Based on the testing demand, adjust the beater and flexing grip, then load to the desired position. It can be used to test rubbers, leather, and plastics, PU leather etc. The unit can be adjusted to meet different requirements.

Read more

Martindale Abrasion Tester - GenDale

Martindale Abrasion Tester - GenDale

GenDale is mainly used to test shoe fabric, shoe lining, and many other types of shoe related materials. The unit can test up to four specimens at the same time for abrasion. The fabric specimen is measured by having rubbing applied on it via a complex direction of back and forth motion. The accuracy of abrasion strength is determined by the specific number of cycles conducted until a hole appears in the test area of the fabric specimen.

Read more

Mooney Viscosity Testing Machine - GenMooney

Mooney Viscosity Testing Machine - GenMooney

GenMooney is a viscosity testing machine is applied to measure the viscosity of the unmixed or mixed unvulcanized natural rubber, synthetic rubber and regenerated rubber .This tester has many functions such as fast warming, maintaining temperature, data stability, etc. It is equipped with an automated calibration feature for a simple data calibration of each experiment.

Read more

NBS Rubber Abrasion Tester - GenNBS

NBS Rubber Abrasion Tester - GenNBS

GenNBS is used to test the abrasion resistance of vulcanized rubber or other rubber compounds. It is commonly used for the soles and heels of footwear. It has an intelligent power failure recovery system. The unit conducts measurements through volumetric loss of specimens exposed to the action of a normalized abrasive medium secured to a rotations cylinder.

Read more

Oscillating / Automatic Disk Rheometer (ODR) - NG-ODR

Oscillating / Automatic Disk Rheometer (ODR) - NG-ODR

This machine is designed to get the characteristic curve and characteristic parameters of rubber vulcanization by measuring the applied moment of rubber to the oscillating dye body. NG-ODR rotor-free vulcameter has an excellent stability of results. The data and diagrams can be used as a reference for development, research and production quality.

Read more

Salt Spray Tester - GenSalt

Salt Spray Tester - GenSalt

GenSalt is designed to test the surface of different materials for resistance to corrosion. The unit is commonly used to test coated materials of a metallic nature in a controlled corrosive environment. The test can be used on rust-proof painting, anodizing, electroplating and rust-proof of grease. The machine imitates expedited corrosion process via salt spraying on a given test sample to identify the corrosion (oxides) resistance. Test results are based on the longevity of time a material can resist visible corrosion on the test sample.

Read more

Wyzenbeek Abrasion Tester - GenWyze

Wyzenbeek Abrasion Tester - GenWyze

The machine is designed to test the abrasion resistance of fabrics and metals. The abrasion of fabrics is tested when the specimen is pulled over the frame and rubbed against an abradant over a curved surface. The number of cycles, also known as double rubs, conducted on the specimen before the fabric shows visible wear is used to determine the rating of abrasion.

Read more

Vertical Rebound Resilience Tester - GenRebound

Vertical Rebound Resilience Tester - GenRebound

GenRebound tests the resilience of rubber compounds. The machine must be adjusted in a horizontal position and the plunger raised at a specific height. The plunger is then released onto the specimen for a given number of impacts. The measurements are based on the 4th, 5th, and 6th impacts. The average of the three (3) measurements is then calculated for the test result. The machine is highly useful in production of compounds designed to absorb vibration or shock according to the ASTM standards.

Read more

Taber Abrasion Tester - GenTaber

Taber Abrasion Tester - GenTaber

GenTaber used evaluate abrasion resistance. It can conduct tests on a wide range of materials such as: cloth, paper, paint, plywood, leather, tile, glass, rubber etc. It tests the specimen by rotating it while in contact with the grinding wheel and applying the required pressure. The Joss of weight reflects on the change in weight of the specimen. The unit also has an intelligent power failure recovery function.

Read more