ISO 75-2, Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite, is the test method for the procedure described below.
ISO 75-2 Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite
At a Glance
Document type: Test Method.
Edition: active, edition ISO 75-2:2013.
Scope
Specific requirements for plastics, including filled plastics and fibre-reinforced plastics in which the fibre length prior to processing is up to 7,5 mm, and ebonite.
Used with the general method of ISO 75-1.
What the Result Tells You
Because the numbers depend on those fixed conditions, a result is only meaningful when the report names the standard, the edition and any options the method allows.
Equipment for This Standard
Equipment on our site referenced against ISO 75-2:
HDT/VICAT Testing Machine – Thermal Analysis for Plastics NG-HDT
Reading the Designation
ISO 75-2: the designation as published by the issuing body.
Year suffix: the revision is identified by its year, as in ISO 75-2-13. A specification that names an edition fixes that edition; a later revision does not apply to an order retroactively.
When a drawing, purchase order or quality procedure cites this document, the test setup, the specimen and the report follow that citation.
Get Help With ISO 75-2
For a setup built around ISO 75-2, or to confirm which fixtures and accessories a given specimen calls for, Request a Quote or Contact Us.
Part of a Series
ISO 75-2 is one part of ISO 75. The other parts of the series cover related requirements, so the part cited in your specification is the one that governs the test.
