ISO 29862, Self adhesive tapes — Determination of peel adhesion properties, is the test method for peel resistance.
ISO 29862 Self adhesive tapes — Determination of peel adhesion properties
At a Glance
Document type: Test Method.
Edition: active, current edition ISO 29862:2024.
Property determined: peel resistance.
Scope
Specifies a series of methods for determining the peel adhesion properties of self-adhesive tapes: Method 1, peel adhesion from stainless steel at 180°; Method 2, peel adhesion from its own backing at 180°; Method 3, peel adhesion of double sided and transfer tapes at 180°; Method 4, adhesion of the liner to an adhesive tape at 180°.
In Method 1 a length of tape is applied to a standard plate, the plate is fixed in one jaw of a dynamometer and the free end of the tape is pulled at 180° to the plate.
What the Result Tells You
A test to ISO 29862 characterises the peel resistance of the material or assembly under the conditions the method fixes: specimen form, rate of loading and the environment in which the test is run.
Because the numbers depend on those fixed conditions, a result is only meaningful when the report names the standard, the edition and any options the method allows.
Equipment for This Standard
Equipment on our site referenced against ISO 29862:
Specialized Grips and Fixtures for Tear, Peel, and Puncture Testing
Reading the Designation
ISO 29862: the designation as published by the issuing body.
Year suffix: the revision is identified by its year, as in ISO 29862-24. A specification that names an edition fixes that edition; a later revision does not apply to an order retroactively.
When a drawing, purchase order or quality procedure cites this document, the test setup, the specimen and the report follow that citation.
Get Help With ISO 29862
For a setup built around ISO 29862, or to confirm which fixtures and accessories a given specimen calls for, Request a Quote or Contact Us.
