DIN EN ISO 13934-1 | NextGen Material Testing

DIN EN ISO 13934-1, Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method, is the test method for the procedure described below.

DIN EN ISO 13934-1 Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method

At a Glance

Document type: Test Method.

Edition: German adoption of EN ISO 13934-1; ISO edition ISO 13934-1:2013.

Scope

Specifies a procedure to determine the maximum force and elongation at maximum force of textile fabrics using a strip method.

Mainly applicable to woven textile fabrics, including fabrics with stretch imparted by elastomeric fibre or by mechanical or chemical treatment, and can apply to fabrics produced by other techniques.

Not normally applicable to geotextiles, nonwovens, coated fabrics, textile-glass woven fabrics, or fabrics made from carbon fibres or polyolefin tape yarns.

What the Result Tells You

Because the numbers depend on those fixed conditions, a result is only meaningful when the report names the standard, the edition and any options the method allows.

Equipment for This Standard

Equipment on our site referenced against DIN EN ISO 13934-1:

Snubbing Grips for Wire and Cable Tensile Testing

Reading the Designation

DIN EN ISO 13934-1: the designation as published by the issuing body.

Year suffix: the revision is identified by its year, as in DIN EN ISO 13934-1-13. A specification that names an edition fixes that edition; a later revision does not apply to an order retroactively.

When a drawing, purchase order or quality procedure cites this document, the test setup, the specimen and the report follow that citation.

Get Help With DIN EN ISO 13934-1

For a setup built around DIN EN ISO 13934-1, or to confirm which fixtures and accessories a given specimen calls for, Request a Quote or Contact Us.

Products With This Standard: DIN EN ISO 13934-1

Below you can find the products in our catalog that support this standard and the related testing workflow.

Snubbing Grips for Wire and Cable Testing

Snubbing grips, also known as capstan grips, are designed for tensile testing of wires, cables, ropes, textile strips, and geogrids that can slip or break in standard clamps. By wrapping the specimen around curved surfaces, they increase friction and reduce grip-end failures. These fixtures help laboratories achieve safer, more repeatable axial loading for high-strength or flexible materials.

View Product