DIN EN ISO 10319, Geosynthetics — Wide-width tensile test, is the test method for tensile properties.
DIN EN ISO 10319 Geosynthetics — Wide-width tensile test
At a Glance
Document type: Test Method.
Edition: German adoption of EN ISO 10319; ISO current edition ISO 10319:2024.
Property determined: tensile properties.
Scope
Index test method for determining the tensile properties of geosynthetics (polymeric, glass and metallic) using a wide-width strip.
Applicable to most geosynthetics including woven and nonwoven geotextiles, geocomposites, knitted geotextiles, geonets, geomats and metallic products, and to clay geosynthetic barriers; not applicable to polymeric or bituminous geosynthetic barriers.
Covers measurement of load-elongation characteristics and includes procedures for calculating secant stiffness, maximum load per unit width and strain at maximum load.
What the Result Tells You
A test to DIN EN ISO 10319 characterises the tensile properties of the material or assembly under the conditions the method fixes: specimen form, rate of loading and the environment in which the test is run.
Because the numbers depend on those fixed conditions, a result is only meaningful when the report names the standard, the edition and any options the method allows.
Equipment for This Standard
Equipment on our site referenced against DIN EN ISO 10319:
Snubbing Grips for Wire and Cable Tensile Testing
Reading the Designation
DIN EN ISO 10319: the designation as published by the issuing body.
Year suffix: the revision is identified by its year, as in DIN EN ISO 10319-24. A specification that names an edition fixes that edition; a later revision does not apply to an order retroactively.
When a drawing, purchase order or quality procedure cites this document, the test setup, the specimen and the report follow that citation.
Get Help With DIN EN ISO 10319
For a setup built around DIN EN ISO 10319, or to confirm which fixtures and accessories a given specimen calls for, Request a Quote or Contact Us.
