DIN 54608 is a DIN test method for determining the buckling resistance of corrugated board using a defined laboratory bending (buckling) setup.
It is commonly used in packaging and converting quality control to compare corrugated board constructions and to monitor process effects that reduce stability (for example, flute damage, weak bonding, or handling-related deformation). If you need help matching your product and flute type to the correct edition and test setup, talk with our team.
DIN 54608:2022-05 — Board – Buckling resistance of corrugated board
DIN 54608 specifies a procedure to determine the buckling resistance of corrugated board (German: “Knickwiderstand von Wellpappe”). The current edition is DIN 54608:2022-05, which replaced DIN 54608:2017-08.
The method is intended for single-wall and double-wall corrugated board and covers multiple flute types and combinations used in industrial packaging.
Quick Definition
DIN 54608 is a standardized 3-point buckling (bending) test used to quantify the buckling resistance of corrugated board specimens taken in a defined direction.
Document type: Test method (laboratory procedure).
What This Standard Covers
The standard defines how to prepare and test corrugated board specimens to obtain a buckling resistance value under a controlled 3-point test arrangement.
Scope focus: Corrugated board buckling resistance (Knickwiderstand), including single-wall and double-wall grades.
Flute coverage: The 2022-05 edition’s scope includes flute types A, B, C, D, E, and F (and combinations).
Why This Standard Matters in Testing
Buckling resistance is a practical stability metric for corrugated board. It is often used to differentiate board constructions, detect sensitivity to converting steps (scoring, printing, die-cutting), and monitor production variability that can weaken the structure.
Because corrugated board is anisotropic and sensitive to damage, the test outcome can change noticeably with specimen orientation, flute structure, and the condition of the liners and adhesive bond.
Common Materials, Product Types, or Applications Covered
This method is used with corrugated board used in transport packaging and components such as pads, partitions, and structural inserts where panel stability matters.
Common use cases: Incoming material checks, production QA/QC, supplier comparison, and development of multiwall corrugated designs.
Common Test or Verification Workflow
DIN 54608 typically fits into a paper and packaging lab workflow alongside other corrugated material characterization tests.
Typical workflow: Sampling and specimen cutting (by direction) → conditioning (as required by the cited lab procedure) → 3-point buckling test on a universal tester → calculation/evaluation and documentation of results.
Equipment Commonly Used for This Standard
DIN 54608 is normally performed on a universal testing machine configured for a 3-point test arrangement suitable for corrugated board.
Common equipment: Universal testing machine (low-force to moderate-force range depending on board grade), calibrated force transducer, 3-point buckling/bending fixture (supports and loading nose), specimen cutting tools/templates, and basic conditioning capability where required.
Equipment selection caution: The edition includes requirements tied to the test setup and machine measurement performance (for example, accuracy class expectations). If you are selecting a tester/fixture package for DIN 54608 work, you can request a detailed quote based on your board types, throughput, and reporting needs.
How to Read This Designation or Revision
DIN 54608:2022-05 identifies DIN standard number 54608 with an edition date of May 2022.
This edition replaced DIN 54608:2017-08. Test parameters, specimen dimensions, and reporting expectations can change between editions, so purchase specifications and internal SOPs should cite the exact edition used.
Related Standards, Methods, or Frameworks
DIN 54608 is commonly used as part of a broader corrugated board test plan. Depending on customer requirements, it may be paired with other board strength or stiffness evaluations to build a more complete packaging performance profile.
Get help configuring a DIN 54608 test setup
If you need a DIN 54608-ready configuration (tester capacity, fixture geometry, and data capture matched to your corrugated grades), contact our team and share the edition you are required to follow and the flute constructions you test.