DIN 53142-1 is a DIN test method used to evaluate the puncture resistance of board by driving a defined penetration tool through a clamped specimen using a pendulum-impact device.
It is commonly used for quality control and material comparison of paperboard and corrugated board where puncture performance helps indicate robustness against handling damage. If you need help aligning your product type and fixture setup to the cited edition, talk with our team.
DIN 53142-1: Testing of board — Puncture test — Part 1 (pendulum punching device)
DIN 53142-1 is part of the DIN 53142 series for puncture testing of board materials. Part 1 focuses on a pendulum-based puncture method using a dedicated pendulum punching (impact) apparatus.
Because puncture involves combined deformation and failure modes (such as piercing, tearing, and bending), it is often used as a practical indicator of how board structures behave under sudden concentrated forces.
Quick definition
DIN 53142-1 in one line: A puncture-resistance test for board materials performed with a pendulum-impact puncture device on a clamped specimen.
Document type: Test method (puncture test).
What this standard covers
DIN 53142-1 covers a laboratory puncture test where a specimen of board is clamped and punctured using a defined penetration tool driven by a pendulum mechanism. The intent is to determine the specimen’s resistance to penetration under the specified method.
The standard is used for board materials where puncture performance is relevant, including cases where structure and cushioning behavior (for example in corrugated board) can influence how the material responds during the puncture event.
Why this standard matters in testing
Puncture resistance testing is often selected when stakeholders need a single, comparative measure that reflects multiple interacting behaviors during a puncture event, rather than a pure tensile or burst value alone.
In purchasing and production settings, DIN 53142-1 results can support incoming inspection, supplier comparison, process-change validation, and correlation to handling or transport-related damage risk for board-based packaging components.
Common materials, product types, or applications covered
DIN 53142-1 is commonly associated with paperboard and corrugated board evaluation where puncture behavior is a practical concern.
Typical examples: Corrugated board structures, paperboard grades, and board-based packaging materials where puncture durability is part of performance screening.
Common test or verification workflow
Most labs apply DIN 53142-1 as a comparative method under controlled conditions, using standardized specimen clamping and a repeatable pendulum puncture event to generate results suitable for trending and benchmarking.
Common workflow: Sample selection and conditioning per internal or cited requirements, specimen preparation, clamping in the pendulum puncture apparatus, execution of puncture impacts, and reporting of the standard’s required puncture-resistance output(s) for the tested material.
Equipment commonly used for this standard
DIN 53142-1 points to a dedicated pendulum puncture tester configuration rather than a general-purpose tensile frame. Equipment selection should focus on repeatable pendulum impact performance, correct clamping, and the specified penetration tool geometry for the method.
Common equipment: Pendulum puncture (pendulum punching) test device, specimen clamping frame, specified penetration tool, and the instrumented/indicated measurement system required by the apparatus to capture the puncture result.
If you are comparing pendulum puncture tester options, fixture formats, or accessory packages for board testing, you can request a detailed quote matched to your throughput and reporting needs.
How to read this designation or revision
DIN 53142-1: “DIN” identifies the German national standard body; “53142” is the puncture-test standard number; “-1” designates Part 1 of the series (pendulum method).
Edition sensitivity: DIN standards are commonly cited with an edition date (for example, a year-month format). Equipment setup, fixture details, and reporting expectations can depend on the exact edition called out in a customer specification or contract.
Known replacement information: DIN 53142-1:2014-12 replaces DIN 53142-1:2004-12.
Related standards, methods, or frameworks when useful
DIN 53142 is a multi-part standard. DIN 53142-1 addresses the pendulum-impact puncture approach, while the series also includes another part that uses a different puncture drive concept.
Related within the same series: DIN 53142-2 (Part 2 of DIN 53142) is commonly cited alongside Part 1 when organizations specify puncture testing but allow or require a specific apparatus type.
Get help selecting a DIN 53142-1 test setup
If you need to match a pendulum puncture tester configuration to the exact DIN 53142-1 edition referenced by your customer or internal spec (including fixture expectations and practical lab workflow), contact our team to discuss your samples, throughput, and reporting requirements.