Blog - Default - Page 20 of 20 - NextGen Material Testing

Leeb Rebound Portable Hardness Tester

27 October 2015

Developed in 1957 the Leeb Rebound Testing method provides a portable solution for metal testing. By offering a Non-Destructive Testing (NDT) advantage, the Leeb Rebound Test stands apart from the traditional laboratory hardness testers. The Leeb hardness testing scale derives […]

Telebrineller Portable Brinell Type Hardness Tester

27 September 2015

Telebrineller is a portable system designed primarily for measuring Brinell hardness anywhere in the field, the plant or the laboratory. A Telebrineller test bar must be selected with a hardness value plus or minus 15% of the specimen’shardness value. Standard […]

Metallographic Abrasive and Precision Saws for Sample Preparation

13 August 2015

Metallographic cut-off saws are essential tools for cutting hard materials, such as metals, ceramics for sample test preparations. The cut-off saws vary by size and type of the cutting disc depending on the sample preparation requirement and its material composition. […]

Best Metallographic Mounting Presses for Reliable Sample Preparation

29 July 2015

Metallographic sample preparation plays a key role in material analysis, as it provides assurance that specimens are properly encapsulated for microstructural analysis to be accurate. The quality of this process directly impacts metallographic testing reliability, affecting research outcomes, industrial quality […]

Metallographic Grinders and Polishers for Sample Preperation

1 May 2015

Metallography is the study of the microstructure of different materials. It is an essential part of metallurgical material testing and the study of material science. Metallographic microstructure analysis of materials helps to determine if the material has been properly processed. […]

BrinGen-3000 Series – Digital and Automatic Closed Loop Brinell Hardness Tester

12 March 2015

Brinell Hardness Testers are ideal for testing materials that have a structure that is too coarse or that have a surface that is too rough to be tested with other hardness scales, such as castings and forgings. These testers are […]

Product Focus: BrinGen 3000 Series – Brinell Hardness Tester

10 March 2015

Semi-Automatic and Fully Automatic Micro Vickers and Macro Vickers Hardness Testing Machine

15 January 2015

The GenVick NG10 and NG30 – Micro and Macro Automatic Vickers Hardness Testing System has finally been developed and introduced to the product line of NextGen Material Testing. With the introduction of this new product, the industry of Vickers hardness […]

Blogs