TensileMill CNC - Flat Specimen Preparation

TensileMill CNC - Flat Specimen Preparation

TensileMill CNC - Flat Specimen Preparation

Description

TensileMill CNC's - Flat Tensile Sample Preparation Machine has brought about a more facilitated method than ever for flat tensile sample preparation of high quality. Operation of our TensileMill CNC is done with our powerful Carbon software that has a tensile milling interface which is very user-friendly. Following the outlined parameters in your ISO, ASTM, JIS, DIN, or any other industry, the interface enables the quick and easy selection of the desired tensile specimen size by the operator. The machine is ready for milling a few seconds after you simply enter your specific measurements.

Specimen sizes previously entered are saved by the tensile software interface for quick and easy access. The interface also comprises a wide range of tensile specimens which has been programmed to allow the operator easy and quick launch of a program with no need to enter any measurements. Your modern TensileMill CNC - Flat Specimen Preparation, gives you access to our powerful and intuitive CNC control system (Carbon software interface) which is standard and has no limits on possibilities.

Controller

Our touch screen controller which is easy to manipulate carries our complete Carbon software. The features of our control systems; 64 Gb of storage, WiFi, Ethernet, 4 Gb of RAM, USB ports, 254 tool offsets, macro B programming, 126 work offsets, scaling and mirroring, drilling canned cycles, helical interpolation, cutting edge dual mode cutter compensation, advanced trajectory planning etc. In addition to the software interface for tensile milling, the operator is allowed by Carbon to get access to the Industrial CNC Software (MACH4), which is used to control professional CNC functions. New features are being developed constantly for our Carbon software and at no extra cost, updates are included into every TensileMill CNC system. Our small and super fast machining center, TensileMill CNC is designed mindful of industry testing.

Technical Specifications

TensileMill CNC
X Travel 10.6"
Y Travel 6.3"
Z Travel 10.6"
Table Size X 21.65"
Table Size Y 6.3"
Face Mill Capacity 2"
Min Spindle Speed (RPM) 3000
Max Spindle Speed (RPM) 24000
Spindle Type ISO 20
Motor Size (hp) 2 (1.5 kW)
Spindle Control Yes
Flood Coolant Included Yes
Homing Switched Yes
Control System CARBON CNC
Repeatability 0.0004"
Rapid Traverse Speeds 500 ipm
Screw type Ball Screw
Backlash Compensation Double - P5 class PMI
Weight (lbs) 1200
Dimensions 49.2 x 57.1 x 76.8 in (1250 x 1450 x 1950 mm)
Voltage 3HP 220V/50/60Hz 1ph

Specifications

TensileMill CNC is a small, high speed, machining center designed for the testing industry in mind. Although small in size, TensileMill CNC is built on a heavy cast iron frame and all axes slide smoothly on linear rails. 24,000 RPM ISO20 spindle and high powered servos provide excellent machining capability.

Features

  1. 21.6" x 6.3" Table
  2. Hiwin precision linear ways
  3. 3000 to 24,000 rpm precision spindle
  4. 220V 15A single-phase AC
  5. ISO 20 Spindle Interface
  6. High quality casting
  7. Compact structure
  8. PMI double nut ballscrews
  9. High-quality electrical components
  10. Automatic lubrication system
  11. Axis bellows covers
  12. Full enclosure
  13. CE and CCC safety certification