The GenCut Series - Abrasive and Precision Metallographic Cutting Equipment offers a range of machines to match your specific cutting requirements. GenCut - Metallographic Cutter systems are equipped with the highest level of cutting accuracy and have a user friendly interface for ease of operation. A variety of sample sizes can be accommodated with the use of our abrasive and precision cutters. The cutting saws are all equipped with a recirculating coolant system to prevent over-heating.
The NKC 4000 Series manual and automatic abrasive cut off saws are perfect for the medium to high volume metallographic sample preparation lab. These powerful machines are capable of cutting pieces up to 120mm in diameter and with a cutting depth of up to 460mm. Front and side windows give easy access to the open cutting chamber.
NKC 2000 Series compact manual and automatic abrasive cut-off saws are a smaller version of our larger cutters, GenCut NKC 4000 Series, with the same robust built, precision components and ease of use. The units have a cutting depth of 200mm, and the magnetic cleaning spray gun cane be stored in any location.
GenCut LC - Robust Abrasive Cut-Off Saw has a clever design for ease of access, and is equipped with a retractable cut-off blade and flexible clamping. The cut-off blade sizes are easily interchangeable. The unique value of this robust abrasive cutter is that the blades move easily up and down.
GenCut LF Series - Large and Robust Abrasive Cut-Off Saw is a wet abrasive metallographic cutting machines use a cut-off wheels ranging from 12" (305mm) to 20" (508mm). These abrasive cutters offer manual and automated cutting. The machines are capable of cutting pieces up to 6" (150mm) in diameter with a cutting depth of nearly 18" (450mm) and 250mm height.
GenCut QL Fully Automatic Abrasive cut-off saw uses a cut-off blade ranging from 10" (255mm) to 16" (406mm). These machines are capable of cutting pieces up nearly to 120mm in diameter and with a cutting depth of 200mm height.
GenCut GL 100 Series - Low Speed Precision Cut-Off Saws are versatile and powerful machines and are perfect for the user needing to section delicate parts or materials with no deformation.
GenCut GL 200 Series low speed advanced automatic precision cut off saws are well established in the metals industry. The diamond saw precision cutters are a perfect fit for cutting and sectioning a wide variety of small and delicate samples particularly when the material structure is not homogeneous.
GenCut GL 600, 700 and 800 Series is a compact and powerful, table-top manual abrasive cutter, that fits well into any metallographic or materials oriented lab. It is equipped with a ro-bust 1-3HP motor. The machine is designed for heavy duty continual use.
The GenCut GL 1000 Series high speed precision cut-off saw is designed for a laboratory that allows the operator to section any kind of material with virtually no deformation. The GenCut GL1000 precision metallographic cut-off saw is a high speed precision cutter, able to use both diamond and abrasive blades. It additionally allows to cut on X & Z axis to a perfect cut every time.
GenCut GL 2000 precision and abrasive cut-off saw is an automatic metallographic cutter with an excellent touch screen panel. This precision/abrasive cutter enables simple, quick and easy positioning of samples for cutting and sectioning. It allows metallographic cutting in 2 directions, large cutting capacity and programmable cutting function. GL 2000 recision and abrasive cut-off machine can use either the abrasive cut off blade or the diamond blade on variable rotational speed.
GenCut QA Series manual precision cut off saws are manual units excellent for section cutting from printed circuit boards, other large flat materials or electronic components. These manual metallographic cutters are equipped with a diamond blade.
It is difficult to estimate the precise time that it takes to cut a specific type of material with abrasive cutter machines. There are few factors responsible for the variance in time. These factors include the type of material, material hardness, and the structure of the sample. These three factors must be evaluated in synergy to identify the most accurate estimate for your metallographic abrasive cut. Contact us today to help identify the right abrasive cut off solution for you.
The main difference between the precision and abrasive cutters for metallography equipment is the delicacy of the cut. Metallographic precision cutters are designed to provide a high quality finish for delicate materials for ease of sample preparation needs. Metallographic abrasive cutters are more focused on sectioning larger parts into smaller parts as fast and as efficiently as possible. NextGen can supply your facility with a wide range of metallographic precision and abrasive cutters for all of your cutting needs. Request a quote today to learn more.
NextGen is proud of the ability to create custom solution for various metallographic abrasive cutting needs. Our custom clamps are the secret. If require a custom solution for your abrasive metallographic cutting needs, we are here to help. Upon placing your order, the abrasive machines will be manufactured with your custom clamps and final tests with your specimens will take place in our facility to insure the optimal time / speed of cut for the optimal results. Learn more by contacting us today.