The GenPress Series - Metallographic Mounting Presses is designed to alleviate the user from the challenge of handling difficult specimen shapes and sizes during sample preparation procedures. The equipment is also used to protect the edges and any other defects found on the surface of the samples. A thermoplastic medium is required for stability to support the sample in the process of grinding and polishing. These metallographic mounting presses come standard with all the necessary consumables for your long term unit operation. Be sure to review the videos within the product pages to learn how simple these metallographic mounting presses will help you reach your sample preparation goals.
The semi-automatic NextGen single cylinder MSA I and MSA II Mounting Press systems provide leading technology for best edge retention in a variety of mold sizes. Our NextGen MSA presses have an integrated hydraulic system to apply the necessary compression to form one to three samples at any given time.
NextGen's MFA Series - Fully Automatic Mounting Presses for Metallographic Sample Preparation is an advanced automatic mounting press for compression mounting of material samples. The fully automatic mounting press system is controlled with a basic keypad where the parameters for heating, cooling and timing can all be adjusted.
Equipped with the same advanced features of the GenPress MFA series - fully automatic mounting press for metallographic sample preparation, the MFA-TS - automatic hot mounting press systems are easily controlled via a built in touch screen panel.
GenVac MP2 - Vacuum Impregnator is designed for precision sample impregnation for porous materials. Common applications for vacuum impregnation systems include rocks and minerals, ceramics, electronic circuit boards and other composite materials.
The metallographic mounting press equipment is technologically advanced yet fundamental in its operation. The metallography mounting presses with NextGen can come upgrade with a 3 piece samples mounting option. This allows you to reach triple productivity with the same unit. The fully automated metallographic mounting press gives you an additional benefit of no operator involvement during the hot mounting press process. Request your quote today to learn more.
When it comes to mounting larger volumes of metallographic specimens we would recommend going with the MSA Series semi automatic mounting press or the MFA Series fully automatic mounting press. Both of the suggested mounting presses for metallographic specimen preparation offer a high speed sample preparation with minimum to virtually no operator involvement. These state of the arts mounting presses allow the operators to spend minimum time preparing between 1 to 3 samples at any one given time in minutes. Feel free to review the videos outlining the process for our Semi-automatic mounting press equipment and Fully-automatic mounting press equipment or visit our YouTube channel for additional specimen preparation solutions.
All of NextGen's hot and cold mounting press solutions are design with user-friendliness in mind. The question becomes 'which unit is the most optimal based on my daily sample volume'. With our manufactured to order and refurbished cold mounting press line-up, we are confident that we will find the correct option for your daily sample volume and time savings. Contact us today to learn more.
NextGen's lead time commitment for your semi-automatic mounting press is between 2-4 weeks from the beginning of the manufacturing phase to doorstep delivery. The semi-automatic mounting press machines are thoroughly tested and inspected in our facility prior to dispatch to insure that you get the perfect metallographic mounting solution every time. Contact us today to learn more.